Our Color Coated Corrugated Sheets are manufactured by using Alu-Zinc coated plate (PPGL) as the raw material, combined with a high quality, suatable and economical paint. With imported production lines, we are able to produce adequate amount of steel corrugated sheets as aesthetics, good quality and economical light weight, high strength product to satisfy large scale market demands as well as to model your dream structure. Our Trapezoidal Profile is excellent use for Roofing and Cladding.
colour coated trapezoidal roofing sheet
Total Coating Thickness (TCT) : 0.4, 0.45, 0.47, 0.5, 0.55, 0.6, 0.65, 1.0 (mm.)
Width: 3.5 FT
Standard Length (Feet): 8, 10, 12, 14, 16 (Customizable upto 30 Feet).
Colour Available- B-RED,OFF-WHITE,SKY-BLUE,T-BLUE,MIST-GREEN / Light Gray(Back Side)
*All Dimensions are in MM. variation +/- 10 mm
Purlin Span: 0.5 mm < 1.2 Meter
Color coated trapezoidal profile dimentions | colour coated roofing sheets, color roof
Technical Specifications
Pre-Painted Alu-Zinc Steel Sheets (Galvalume*): (55% Aluminium, 43% Zinc, 1.5% Silicon) Aluminium - Zinc Alloy coating gives corrosion resistance and superior heat reflectivity, Galvalume Steel reflects a high percentage of heat and can withstand in any weather conditions, without surface discoloration. It is also suited for coastal areas. Bare Galvalume coating is inorganic and does not contain volatile compounds that can harm the environment.https://www.youtube.com/watch?v=tFxL7b5norUhttps://www.youtube.com/watch?v=tFxL7b5norU
Material Structure
colour coated sheet material structure
Properties of Material
Metalic Coating
Alu-Zinc All Coating AZ150
(Higher or Lower Coating Optional)
Paint Coating
Regular Modified Polyster (RMP)
(Optional - SMP & PVF)
Painting Thickness (Top)
18 - 22 microns
Painting Thickness (Bottom)
5 - 7 microns
Surface Paint Reflection
Glossy Finish (Optional Matt Finish)
Standard Followed
ASTM A755, IS277, JIS3322, AS1397
Tensile Strength
240 - 550 Mpa
No comments:
Post a Comment